Operating Instructions Synchroprint 5000
Operating instructions SP5000 V1-0.docx
Page 24 of 52
Key
Function
“ON/OFF” disables the complete keypad with all his functions.
+
Press “ADJUST” and turn left or right turning knob
simultaneously to adjust number of flood- and print-strokes at
the print cycle.
+
“ADJUST” and “ON/OFF” lifts station when optional station
lifting is installed. Pressing any key of the lifted station will
lower the station again.
Using the two turning knobs allows the following settings:
Turning the left knob adjusts the squeegee carriage speed inwards, the right turning knob the
speed outwards.
To change the adjusted dryer time press the turning knob and turn it simultaneously. The left
turning knob adjusts the print station, the right turning know the empty station to the right.
When a drying time of zero is adjusted, the function changes to external ready signal.
The display shows the actual setting of the print station on the left and the next empty station on the
right. Any combination of the below pictures is possible.
Display
Description
Keypad is disabled completely. To activate press ON/OFF.
Left picture:
Print station is disabled.
Right picture:
Empty station is disabled.
Left picture:
Print station is working as dryer station with external
ready signal.
Right picture:
Empty station is working as dryer station with 3 seconds
drying time.
Left picture:
Print station is active with the following settings:
62%
outward speed squeegee carriage.
100% inward speed squeegee carriage
1/1
One print and one flood stroke
P/W
Plastisol- (first flood, then print stroke) or
Waterbased-Ink (first print, then flood stroke)
LOCK/UNLOCK screen fixing
UP/DOWN
screen position
Right picture:
Empty station is working as dryer station with 3 seconds
drying time.
