Operating Instructions Synchroprint 5000
Operating instructions SP5000 V1-0.docx
Page 34 of 52
A connected dryer will be detected automatically or can be chosen manually. For dryers the
following control panel is displayed.
“On” activates a station, appending parameters are displayed.
“Off” deactivates a station.
A dryer was detected or manually chosen. Appending parameters are
displayed.
Determines the drying time. When time is set to 0, drying mode switches
from internal to external automatically.
“Intern”: Drying time is controlled by the machine. Enter time in the field
above.
“Extern”: Drying time is controlled by the dryer. Machine waits for a
ready signal sent by the dryer.
Switches to the following control panel.
“On” activates a station, appending parameters are displayed.
“Off” deactivates a station.
A dryer was detected or manually chosen. Appending parameters are
displayed.
Drying starts at the beginning of an index.
Drying starts at the end of an index.
Drying starts after the machine has lowered to off-contact position.
Enables or disables lifting screen during drying.
Switches to previous control panel.
