Rev. 112206.1
Page 41
The Production Process
During production the blank discs will be loaded one at a time from the input
spindle into the recorders and/or printer. Upon successful completion the discs
will be unloaded onto the output spindle if the “print” general option is not
selected. If selected, the discs will go to the printer before being placed on the
output spindle. This process will continue until the job is complete and the
SCRIBE PC will then advance to produce the next job in the queue according to
its priority.
However, if the input spindle empties before the job is complete, the screen will
read:
To continue producing the job, place additional blank discs onto the input spindle
and
click
the
Yes
button. To stop the job
click
the
No
button and the remainder of
the job will be aborted. The SCRIBE PC will then advance to produce the next job
in the queue according to its priority.
Note:
Any discs dropped in the reject area have failed to
record properly and should not be used. Be sure to
remove rejected discs periodically during operation.
Creating a job
In order to produce copies you must create a job. Think of a job as your work-
order. It tells the Scribe PC what to do, and how many to do.
•
Click
the
New
button to the right of the Queued jobs area ON THE Job
Manager tab. This brings up the
Creating new job ‘New Job’
wizard.
