Rev. 112206.1
Page 16
Click on browse and locate the PRN, STD, or PDF file to be used. Enter
the desire number of copies and optionally select “Print before copying /
verifying” (for use when using BizCDs
and BizCD adapter) and / or
“Ignore low ink level”.
A note about “Ignore Low Ink Level”
Competitive systems continue to attempt to print even when cartridges
have run out, resulting in ruined discs.
PicoJet
equipped Scribe PC
systems will stop at 4% remaining ensuring you will not waste discs.
Optionally you can choose to ignore this safeguard to glean the last few
discs out of a cartridge.
When you re satisfied with your choices,
click
on “Next” to continue:
•
Use the default “Job Name” or enter your own such as a work order
number.
Click
FINISH when you are ready.
The “Jobs in Progress” section of the Job Manager TAB will now show
the status of the job you just started. The Scribe will now load the
master disc into the drive. Once read-in successfully, it will accept the
master disc to the output hopper and then load the first blank disc to
begin duplication.
