78
On the rear of the TV set, you will find audio
sockets and a digital audio-out socket (see page
81) which can be used to connect the TV set to a
HiFi system (HiFi amplifier).
If you wish to play back the sound only via a HiFi
system (HiFi amplifier) which is connected with the
aid of a Cinch cable, you must select the function
"Sound via HiFi".
If you wish to play back the sound only via a HiFi
system (HiFi amplifier) which is connected with the
aid of an optical audio cable ("Toslink", available
as an accessory), the follo-
wing settings should not be
made.
Setting sound via HiFi
• Press the "
MENU
" key to
open the TV menu.
• Press the red key
to open
the menu "Configuration".
• Press the "
OK
" key to move
to the right-hand column.
• Use the cursor control key
or the corresponding nume-
ric key (in the example:
)
to select "Sound settings".
• In the setting window, use the cursor control key
to select the menu item "Sound via…".
• Use the
- +
key to select "Sound via HiFi".
• Press the "
OK
" key to save the new setting.
• Press the "
EXIT
" key to close the TV menu.
In normal TV Mode, the function "Sound via..."
can be activated temporarily by pressing the yel-
low key
and using the
- +
key.
27. Sound via HiFi Amplifier
HiFi output
Opening the menu
MENU
OK
!
OK
EXIT
The number of subjects and sections depends
on the selected scope of operation. Depending
on the configuration of the TV set, the various
menu items may be displayed in a different
order and numbered differently.
2) Possible only on sets equipped with this
function.
Data Logic adjustm.
EPG settings
Operating
Sound settings
HiFi output
2)
Init. prog.position
AV function
Function for F3
Function for F2
Function for F1
EURO sockets
DVB-T
Analog-TV
Country
Language
Operating
Configuration
Change with
Accept value with .
– +
OK
F1
➔
Mute (two-stage) on
Sound via
HiFi
607 47 2042.A1 Clarus GB 04.12.2007 9:59 Uhr Seite 78
Downloaded From TV-Manual.com Manuals