69
25. Registering AV Devices
Opening the menu
MENU
AV
(audio/video)
devices
are external devices
which deliver video and/or audio signals (such
as video recorders, DVD players, DVD recorders,
etc.) and which can be connected to TV sets.
All commonly available AV devices are listed in
the menu "AV devices".
Note that you must always connect AV
devices exactly as shown in the connection
diagram in the TV menu of your TV set !
SVHS/Hi8 and Data Logic video recorders
must
always
be connected to the EURO1 socket of the TV set.
In the factory, the EURO1 socket is programmed
for a video recorder and the EURO2 socket is pro-
grammed for a DVD player.
Registering an AV device on
the TV set
• Press the "
MENU
" key to
open the TV menu.
• Press the yellow key
to
open the menu "AV devices".
• Use the cursor control key
to select the AV device you
wish to register and press
the "
OK
" key.
• Press numeric key
"
and
use the
- +
key to select the appropriate signal
types (OUT/IN) for this device and press "
OK
"
to confirm your selection. For details of the sig-
nal types, see page 66 and the operating
instructions for the AV device being connected.
• If desired, press numeric key
, enter a diffe-
rent name for this AV device and press "
OK
".
• Use the cursor control key to select "Connect"
and press the "
OK
" key. Then connect the AV
device to the corresponding EURO socket.
☞
i
Caution! Connection of
a new device may cau-
se an existing connec-
tion diagram to be
changed. If so, you
must reconnect the AV
devices accordingly.
☞
OK
OK
EXIT
Connect as follows:
Videorecorder CVBS CVBS EURO1
DataLogic
Name
Signal types
connect
HiFi amplifier
AV-Receiver
Other device 2
Other device 1
PC
Satellit / set top
DVD Player 2
DVD Player 1
DVD/Videorec.2
DVD/Videorec.1
F1
➔
select
connect
and clear
OK
✗
VCR
➔
➔
AV devices
607 47 2042.A1 Clarus GB 04.12.2007 9:59 Uhr Seite 69
Downloaded From TV-Manual.com Manuals