Metz Clarus Operating Instructions Manual Download Page 30

Page: 30 / 114

12.1 Sound Settings for

Programmes via TV Menu

Some of the menu items are not available
in a 2 ** menu.

Forced mono

It may happen that your TV set switches from
mono to stereo in the middle of a programme, alt-
hough no stereo sound is being transmitted. This is
generally caused by the local reception condi-
tions. If you activate "Forced mono" for the selec-

ted programme position, all
programmes from this station
will be reproduced in mono.

Activating forced mono:

• Press the "

MENU

" key.

The TV menu appears on
the screen.

•Press the blue key

. The

menu
"Picture and sound" and the
menu
item "General picture set-
tings" are
pre-selected.

• Use the corresponding numeric key (in the

example:

) to select "Sound settings for Pr.".

• Use the corresponding numeric key (in the

example:

) to select "Forced mono".

• In the setting window, use the

- +

key to change

the setting.

• Press the "

" key to save the new settings.

• Press the "

EXIT

" key to close the TV menu.

Individual sound settings can also be made
in the station table.

☞

Opening the menu

EXIT

The number of subjects and sections depends

on the selected scope of operation. Depending

on the configuration of the TV set, the various

menu items may be displayed in a different

order and numbered differently.

Forced mono on

Forced mono

Tone settings

Volume correction

Sound set,.prog.posn

Sound settings, gen.

Pict.set.,prog.posn.

Picture settings, gen.

Picture-Volume

Change with

Accept value with

– +

607 47 2042.A1 Clarus GB 04.12.2007 9:59 Uhr Seite 30

Downloaded From TV-Manual.com Manuals

Summary of Contents for Clarus



















































































































Search results

Summary of Contents for Clarus

Reviews:

Related manuals for Clarus

Brands by name

Popular brands

Metz Clarus, Operating Instructions Manual

Search results

Summary of Contents for Clarus

Reviews:

Related manuals for Clarus

Brands by name

Popular brands