manualshive.com logo in svg

Metz Axio 32 FHD CT, Operating Instructions Manual

Share
Download
Metz Axio 32 FHD CT Operating Instructions Manual Download Page 91

91

Section 21.4 only in the case of correspon-

ding equipment or conversion.

Each DVB-S receiver must be assigned a sub-
scriber number (SCR no.) and the associated sub-
scriber frequency (SCR freq.) from the frequency
bank (see channel router or its user’s guide) 

Each subscriber number and subscriber fre-
quency may only be assigned once.

The DVB-S receiver in the TV
set requests the data for the
desired programme from the
channel router.

Setting the SCR no. and SCR
freq.

• Call up the TV menu with

the MENU button

• Use the red button

to

open the “Configuration”
menu.

• Select the menu option

“DVB-S” with the assigned
numeric buttons. In the
example it is 

!

.

• Press the 

OK

button and the “Arial facility”

setup window opens.

• Use the cursor control buttons to select 

“Antenna” and then the 

– +

button to select 

“Unicable”.

• Use the cursor control buttons to select the SCR

data for each receiver.

• Enter the required data with the 

numeric buttons.

• Confirm the setting by pressing the 

OK

button.

• Clear the “TV menu” with the 

EXIT

button.

☞

☞

21.4 Set-up of satellite system

Unicable

Opening the menu

The number of subjects and sections depends

on the selected scope of operation. Depending

on the configuration of the TV set, the various

menu items may be displayed in a different

order and numbered differently.

OK

EXIT

MENU

 

Antenna

Unicable Power compensation off

SCR1 no.

1 SCR2 no.

4

SCR1 freq.

1284 MHz SCR2 freq.  1632 MHz

General settings

Manual search

Automatic search

Search settings

Satellit B

Astra 19,2°

Arial facility

Function for F2
Function for F1

EURO sockets

DVB-C

DVB-T

DVB-S 

Analog-TV

Country

Language

Operating

F1

➔

Configuration

Change with

Accept value with    .

–   +

OK

608 47 2046.A1 608/609 GB  03.11.2009  16:36 Uhr  Seite 91

Summary of Contents for Axio 32 FHD CT

















































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands