manualshive.com logo in svg

Metz Axio 32 FHD CT, Operating Instructions Manual

Share
Download
Metz Axio 32 FHD CT Operating Instructions Manual Download Page 37

37

Base width and spatial sound

The menu points base width and spatial
sound are only shown when the function
"SRS WOW" is turned off.

Base width

In the case of stereo transmissions, the base width
(= spatial distance between the loudspeakers) can
be artificially widened to achieve a larger stereo
triangle. 

Spatial sound

In the case of mono transmis-
sions, an artificial stereo effect
can be produced.

Activate base width/spatial
sound:

• Press the "MENU" key.

The TV menu appears on
the screen.

• Press the blue key

. The

menu "Picture and sound"
and the menu item "General
picture settings" are pre-selected.

• Press the numeric key 

to select "General

sound settings".

• Select "Spatial sound" or "Base width" with key

allocated, in the example 

or 

• In the setting window, use the 

– +

key to change

the setting.

• Press the "

OK

" key to save the changed setting.

• „Press the "

EXIT

" key to close the

TV menu.

☞

Opening the menu

12. General Sound Settings

OK

EXIT

2) Possible only on sets equipped with this

function.

3) See glossary for an explanation.
4) Available only if SRS WOW is switched off

MENU

 

Spatial sound

on

Factory  settings

Base width 

4)

Spatial sound 

4)

Balance

Tone setting

Volume headphones

Equalizer

Automatic volume control

3)

SRS WOW 

2) 3)

Volume

Picture-Volume

Change with

Accept value with 

–   +

F1

➔

OK

Picture profile adjustment

2)

Sound set,.prog.posn

Sound settings, gen.

Pict.set.,prog.posn.

Picture settings, gen.

608 47 2046.A1 608/609 GB  03.11.2009  16:36 Uhr  Seite 37

Summary of Contents for Axio 32 FHD CT

















































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands