manualshive.com logo in svg

Metz Axio 32 FHD CT, Operating Instructions Manual

Share
Download
Metz Axio 32 FHD CT Operating Instructions Manual Download Page 4

4

• Take care that no bright artificial light

or sunshine falls directly on the screen.

This could cause reflections which have

a negative effect on the brilliance of

the picture.

• The best viewing distance is five times

the screen diagonal, i.e.

- Approximately 2 m (6.3 ft) for 26"

screens

- Approximately 2.4 m (7.6 ft) for 32"

screens

- Approximately 2.8 m (9 ft) for 37"

screens

- Approximately 3.2 m (10.3 ft) for

42" screens

• The antenna cable and any other com-

ponents (such as a video recorder)

connected between the antenna socket

in the wall and the TV set must comply

with the European standard 

EN 60966-2-4.

• The antenna cable used for connecting

the TV set must have a screening atte-

nuation of at least 75 dB.

1. Installation

• The use of non-approved cables will

invalidate the operating permission for

the TV set.

• Only use Metz bases as a stand for the

LCD TV.

• Use the Metz wall bracket (item no.

604 99 0286.A2) or a suitable Omni-

Mount wall bracket to hang the LCD TV

on the wall. For an OmniMount wall

bracket, you also need the Metz adap-

ter plate 013ZM1091.

• Strong tobacco consumption at the

installation location of the LCD TV can

lead to nicotine and soot deposits

behind the panel glass and thus to an

impairment of the image quality. Such

deposits can only be removed by a

specialist. In extreme cases the panel

may be damaged permanently,

which may require to replace the panel.

The cleaning and / or the replacement

of the panel is not covered by warran-

ty claims.

This TV set is exclusively designed for the
reception and replay of picture and
sound signals.
The TV set is designed for dry rooms
(living rooms and offices).
The room climate should be in a range
from +5°C to +35°C with 75% air humi-
dity.
The TV set must not be used in rooms
with higher air humidity (e.g. bathroom,
sauna, etc.).

The TV set must not be used in rooms
with a high concentration of dust (e.g. a
workshop).
If, as an exception, you operate the TV
set outdoors, then please make sure that
it is protected against moisture (rain,
water spray, dew).

1.1 Proper use

608 47 2046.A1 608/609 GB  03.11.2009  16:35 Uhr  Seite 4

Summary of Contents for Axio 32 FHD CT

















































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands