manualshive.com logo in svg

Metz Axio 32 FHD CT, Operating Instructions Manual

Share
Download
Metz Axio 32 FHD CT Operating Instructions Manual Download Page 57

57

17. Special Functions

Picture-in-Picture

Opening the menu

In the case of TV sets with two receivers, it is pos-
sible to display a DVB programme and to open a
window to show a different analogue programme
or DVB programme from the second receiver or
from the AV programme position.

In principle only one HDTV pro-
gramme can be shown. An HDTV
picture can therefore not be
shown as a PIP. In the case of
100Hz- devices, it is not possible
for a PIP to be shown for the
HDMI- and DVI-AV-programme
position.

Activating the PIP function

• Press the 

F1

key. A small window will

appear. If an HDTV programme is
shown as the main picture, the AV
programme position AV1 will always
appear as the PIP.
If either a DVB programme or an analogue pro-
gramme is shown as the main picture, the same
station will always appear again as the PIP.

• By using the numeric keys or the "P+/P-" rocker

switch, it is possible to select a different AV pro-
gramme position or a programme that is recei-
ved with the second receiver as a PIP.

• You can use the cursor control keys

 

to move the PIP picture on the screen. The

last position to which this picture was set is
saved.

• By pressing the "

OK

" key, you can set the frame

of the PIP picture to active (red) or inactive 
(white).

• The contents of the PIP picture can be changed

only if its frame is active (red). 

• By using the numeric keys or the "P+/P-" rocker

switch, it is possible to select a different AV
channel slot or an analogue channel from the
second receiver.

☞

F1

DVB-Prog.

anologes Prog.

AV-Prog.

HDTV-Programm

608 47 2046.A1 608/609 GB  03.11.2009  16:36 Uhr  Seite 57

Summary of Contents for Axio 32 FHD CT

















































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands