![Metz Axio 32 FHD CT Operating Instructions Manual Download Page 128](http://html.mh-extra.com/html/metz/axio-32-fhd-ct/axio-32-fhd-ct_operating-instructions-manual_1781302128.webp)
128
34. Connecting a PC: PC [DVI-D]
➜
TV set [HDMI]
Start your PC and preset the resolution to
1024 x 768p 60 Hz. Exit windows and
turn the PC off.
DVI-D
➜
HDMI setting
• Call up the TV menu with the
MENU
button.
• Open the “AV device” menu with the
yellow button.
• Use the
cursor key to select the "PC”
AV device and then click the
OK
but-
ton. Use the
cursor key to go to the
“Signal types” menu option. The set-
tings must be made as shown in Figure
1b
. Exit the menu with the
EXIT
button.
Press the
AV
button for approx. 2
seconds and then select the AV device
“PC”.
Use a commercial multimedia cable
(DVI-D HDMI, fig. 3) to connect the
DVI-D output of the graphics card of the
PC to the HDMI input of your LCD-TV set.
Use the HDMI connector shown in
the AV menu.
Switch the TV on.
• Switch the PC on. When the picture of
the PC is shown on your TV for the first
time, a box is displayed on the bottom
edge of the screen with the resolution
that has been set, e.g.:
Video: 1024 x 768 60Hz
You can call up this information
at any time by pressing the
green button.
While Windows is starting, data is
exchanged between the graphics card
and the TV. The possible resolutions are
determined in the process.
When the start-up procedure is finished,
you can set the resolution as you wish
(recommended = 1360 x 768 - 60 Hz.)
in the Windows menu “Display characte-
ristics”.
☞
☞
fig. 3
fig. 1b
DVI-D
HDMI
Signal OUT
DVI-D
Signal IN
no Signal
Name
Signal types
Connect
Other device 3
Other device 2
Other device 1
PC
Satellit / set top
DVD Player 2
DVD Player 1
DVD/Videorec.3
DVD/Videorec.2
DVD/Videorec.1
F1
➔
✗
AV devices
Change with
Accept value with .
– +
OK
608 47 2046.A1 608/609 GB 03.11.2009 16:36 Uhr Seite 128