manualshive.com logo in svg

Metz Axio 32 FHD CT, Operating Instructions Manual

Share
Download
Metz Axio 32 FHD CT Operating Instructions Manual Download Page 63

63

Everything that is further in the past than the set
time will be lost.
• Press the 

II

button again to continue watching

the paused and recorded programme.

• Press the green button

and show the play bar

(see picture below).

• By briefly pressing the cursor control keys

 

epeatedly, the replay can
be forwarded in increments
of +1 minutes and rewound
in increments of -20
seconds.

• By holding down the cursor

control keys

 

mode will

be enabled at twice the
speed.

• By repeatedly pressing the

cursor control keys

 

,

the replay can be forwar-
ded or rewound at up to 32
times the speed.

In pause mode

II

, the programme can be forwar-

ded or rewound in 10% increments.
If you want to return to the current status of the
programme (“Live”) from time shift mode, then
press the green button

o cause the status

display to appear (play bar, see display insert in
picture) and then press the 

OK

button.

The amount of time that the programme has been
„paused“ is shown on the left beside the bar
display (-08:25 minutes in the example). The time
that the replay lags behind the live broadcast is
shown below the bar display (05:50 min in the
example).

If the TV set is in stand-by mode or switched
off, the recording will be lost.

☞

17. Special Functions

viewing-time shift mode

2)

Opening Timeshift

II

OK

OK

PVR

Stereo

Timeshift

– 08:25 min

Live

18.04.08

20:30:10

– 05:50 min

OK

2) Possible only on sets equipped with this

function.

608 47 2046.A1 608/609 GB  03.11.2009  16:36 Uhr  Seite 63

Summary of Contents for Axio 32 FHD CT

















































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands