manualshive.com logo in svg

Metz Axio 32 FHD CT, Operating Instructions Manual

Share
Download
Metz Axio 32 FHD CT Operating Instructions Manual Download Page 83

83

21.1 Setting Stations

Analogue TV

Terrestrial station search

The terrestrial station search automatically sear-
ches the entire range of available reception fre-
quencies for stations. All stations which are found
are placed in the station table which is displayed
at the end of the search operation. If you are not
satisfied with the order in which the stations are
displayed, you can move them to other positions
or delete unwanted stations 
(see Section 23., "Sorting stations".

Executing a terrestrial station search

• Press the "

MENU

" key to open the TV menu.

• Press the red key 

to open

the menu "Configuration".

• Use the corresponding

numeric key

(in the exam-

ple: (

 

) to select 

"Analogue TV".

• Use the corresponding

numeric key (in the exam-
ple: (

) to select 

"Terr. station search".

• Press the "

OK

" key and, in

the setting window, confirm
the menu item 
"Start station search" by pressing the "

OK

" key.

• The TV set starts to search for available stations.

A station table with the newly found stations is
displayed on the left half of the screen. If a sta-
tion table already existed before the search, the
newly found stations are automatically appen-
ded after the last existing station.

• After completion of the search, all stations which

have been found are sorted.

• You can delete any unwanted stations from the

station table by selecting them with the cursor
control key and pressing the 

II

key.

Opening the menu

The number of subjects and sections depends

on the selected scope of operation. Depending

on the configuration of the TV set, the various

menu items may be displayed in a different

order and numbered differently.
2) Possible only on sets equipped with this

function.

MENU

 

Start stadion search

Terrestrial station  search

Search settings

2)

Function for F2
Function for F1

EURO sockets

DVB-C

DVB-T

DVB-S 

Analog-TV

Country

Language

Operating

Configuration

Start station 

search with      .

OK

F1

➔

608 47 2046.A1 608/609 GB  03.11.2009  16:36 Uhr  Seite 83

Summary of Contents for Axio 32 FHD CT

















































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands