manualshive.com logo in svg

Metz Axio 32 FHD CT, Operating Instructions Manual

Share
Download
Metz Axio 32 FHD CT Operating Instructions Manual Download Page 8

8

Ǽ

 



3. The Remote Control

Do not insert rechargeable batteries in
the battery compartment of the remote
control.

Use only two dry batteries of the type
LR03/ AM4/AAA 1.5V.

The batteries that are used must not be
exposed to excessive heat such as
sunshine, fire or the like.

21

22

The remote control sends commands to
the TV set by means of an infrared signal.
You must point it towards the TV set when
using it. Note that the remote control may
interfere with the operation of other devi-
ces which use infrared signals (such as
infrared headphones).

Sunlight falling directly on the TV set may
interfere with the operation of the remote con-
trol, since the TV set cannot detect the infrared
signals from the remote control under these
conditions. The TV set must be switched on
with the main power switch before it can be
controlled with the remote control.

The most important keys
for normal use

ON
Switches the TV set on with programme
position 1 or the programmed initial
programme position selected, or swit-
ches it OFF (to the standby state).

Numeric keys (direct station selection).

P+ /P- Selects the next/previous pro-
gramme position.

Volume control.
Setting can be changed in the menu.

Back to the previously selected station.

Displays the station table.

i

608 47 2046.A1 608/609 GB  03.11.2009  16:35 Uhr  Seite 8

Summary of Contents for Axio 32 FHD CT

















































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands