METRODATA LTD
WCM5100
Quick Start Guide
76-02-087 Rev A
16 of 62
3.4 Configure the WAN interface
In order for two WCM5100 units to communicate they must be connected using the STM-1
WAN port. The STM-1 interface must be configured to match the network NTU
configuration.
The WAN port is configured by selecting the Data Port Set-Up Menu,
and then select the WAN (STM-1) port:
Ensure that the interface and framing modes are correctly set, then select the next page of
the menu by typing “>” which leads the next page shown below:
