WaveForm CEL-FI GO G41 Manual Download Page 1

Page: 1 / 24

+1 (800) 761-3041

www.waveform.com

[email protected]

3411 W. Lake Center Dr.,

Santa Ana, CA 92704

from

The GO G41 is manufactured by Cel-Fi, but supported by

Waveform and our team of Signal Specialists.

We’ve helped over 50,000 customers boost their signal since our

company was founded in 2007. We’ve installed and configured

thousands of devices in buildings across the country, and

we’re

here to help

. If you have any issues at all, please don’t hesitate to

reach out.

About Waveform

We know, reading manuals isn’t fun. But we promise it’s worth it.

We’ve helped hundreds of customers install the Cel-Fi GO G41 and boost their

signal. We’ve compiled everything we’ve learned in this manual.

Give it a read before you start: it’ll save you time and help you get the best

performance out of your GO G41.

The GO G41 is set-up via the Cel-Fi Wave App,

please skip the installation

instructions provided within the app and follow this manual instead.

PLEASE READ THIS FIRST:

Summary of Contents for CEL-FI GO G41

























Search results

Summary of Contents for CEL-FI GO G41

Reviews:

Related manuals for CEL-FI GO G41

Brands by name

Popular brands

WaveForm CEL-FI GO G41, Manual

Search results

Summary of Contents for CEL-FI GO G41

Reviews:

Related manuals for CEL-FI GO G41

Brands by name

Popular brands