4
Install Process Overview
01
This is the process that we suggest using for installing your Cel-Fi GO G41, each of these
steps is explained in greater detail within the following pages of this manual:
1
Read this manual
– Ideally from start to finish so that you understand the whole process
before you begin.
2
Download the Wave app
(Page 8)
– Visit
waveform.com/waveapp
on your phone to
download the Wave App, which lets you configure your GO G41.
3
Configure the settings of your GO G41 within the Wave App
(Page 8)
– Run through
the initial setup in the Wave App to configure your booster. Skip the install instructions
suggested in the app; we're confident that following our manual will lead to a much
smoother installation experience and better performance from your GO G41.
4
Find the best outdoor antenna location and direction
(Pages 10-12)
– This step is the
most time consuming, but it’s worth the effort. Getting it right has a huge impact on
your system’s performance.
5
”Temporary install” and indoor antenna positioning
(Pages 12-16)
– Without making
any holes in your roof or walls, temporarily run the cable indoors to your GO G41, and
find indoor antenna locations with enough separation from the outdoor antenna.
6
Verify performance and hard-wire everything
(Page 17)
– Run speed tests and check
your bars – if everything's looking good, it’s time to finalize all your cable runs and
mount antennas.
7
Tell us how your system is doing
(Page 22)
– We really love hearing how our customer’s
systems are performing. Send us an email and let us know how things look.
If anything’s unclear, or you’re unsure about something, just
call us at (800) 761-3041,
email us at [email protected], or book a meeting with our dedicated support team at
waveform.com/meet
We're generally available from 9am-5pm PT, Monday to Friday.