2
Signal boosters can be finicky to set up.
The Cel-Fi GO G41 is no exception. It will take a bit of
work to get your GO G41 system installed optimally.
But there’s a reason that most people are willing to take the time to perform an installation,
even if it takes 4 to 5 hours. The GO G41 is the only device on the market that provides an
industry-leading 100 dB of gain. Once you get it set up and running properly, you should see a
significant
improvement in signal, right away.
This manual is based on feedback from hundreds of customers like you. We’ve revised it
dozens of times to make it as helpful as possible.
We promise you’ll be glad if you read it
from start to finish before you get started.
It’ll help you save time, avoid common pitfalls, and
ensure your system works as well as possible.
Who We Are
Hi! We’re Waveform. We’ve been around since 2007, and while we’ve grown a bunch since
then we’re still a small team. There’s just a handful of us answering texts, and picking up calls.
The four of us pictured below lead support and product development. Feel free to reach out
to us at any time; our emails are all just our first names @waveform.com
Harry (Support)
Sina (CEO)
Conold (Support)
Marcus (Product)
Stuck? Have Questions? Please: Contact Us!
We’re a small team, but we really care about helping you get the best results. Talking to
customers is what helps us improve our products. We can also help troubleshoot, and
sometimes a small tweak we suggest can make all the difference.
Even if everything goes smoothly, reach out and let us know how your system is performing.
We love getting feedback: let us know if there’s any way we could have made the install
process or this manual better.
Call us at (800) 761-3041, email [email protected] or book a meeting with our fanatical
support team at
waveform.com/meet
. We’re available from 9am-5pm PT, Monday to Friday.
Install manuals, who needs ‘em?
