Metro DataVac M3, User Manual

Page: 64 / 88

M3
Page 64
8.1.2. Command list
8.1.2.1. Window PART
Window « Part »
(Command by characteristic with "n" = 1 or 2 (number of the characteristic))
Rubric Read. command Write command Comment
Resolution nRES? nRES=x x=1 to 5 (number of decimals)
Unit nUNIT? nUNIT=x x=0(mm)
x=1 (inch)
x=2 (µm)
Dynamic mode nDYN? nDYN=x x=0 (static)
x=1 (maxi)
x=2 (mini)
x=3 (maxi-mini)
x=4 (average)
x=5 (median)
Formula nFM? nFM=x x=0 (C1)
x=1 (C2)
x=2 (-C1)
x=3 (-C2)
x=4 (C1+C2)
x=5 (C1-C2)
x=6 (-C1+C2)
x=7 (-C1-C2)
Direction nDIR? nDIR=x x=0 (sans)
x=1 (internal)
x=2 (external)
Upper tolerance nUT? nUT=seee.ddddd
Nominal nNM? nNM=seee.ddddd
Lower tolerance nLT? nLT=seee.ddddd
Master nMT? nMT=seee.ddddd
Activate control limits nLIMIT? nLIMIT=x x=0 (inactive)
x=1 (active)
Upper control limit nUCL? nUCL=seee.ddddd
Lower control limit nLCL? nLCL=seee.ddddd
Reference nREF? nREF=xxxxxxxx xxxxxxxx = part ref