M3
Page 86
Procedure:
1 – Connect the M3 with the cable Metro ref 18060 to the computer
2 – Start the M3
3 – Configure the flash magic software according to the above picture.
4 – Click on “Start”
It takes from 2 to 5 min depending on the Baud rate selected. During the update, the
screen becomes blurred.
5- The M3 restart automatically when it is finished.
6- Reset the M3 by following the procedure on the chapter 11.
The LPC4357 can
be found on the
“ARM Cortex”
category after
clicking on
« Select ».
If you are
connected directly
on a serial port, you
can use the baud
rate 115200bauds.
If you use a
USB/RS232
convertor, use
38400 bauds.
Summary of Contents for M3
Page 31: ...M3 Page 31 Grey color because of the class parameters ...
Page 41: ...M3 Page 41 MB 8I Module Inductif MB 4D Module Port Mitutoyo MB 1R Module Port RS232 ...
Page 45: ...M3 Page 45 Air gage MB AG module Must be calibrated ...
Page 46: ...M3 Page 46 7 98 8 02 Write here the 2 calibration value which will be used ...
