M3
Page 13
3.3.5. Connectors
3.3.5.1. Version for inductive probes
Note: Metro provides different version for M3 for inductive probes : for Tesa
compatible probes, for Mahr, for Metro or for Marposs. Each of these probes has the
same DIN-5 connector but is different internally. It is therefore necessary to use the
adapted probe depending on your product reference.
You can contact Metro or distributors for any advice about this point.
To connect M-BUS
modules (optional)
On/Off switch
(press 2s. for
shutting down).
Disabled if the unit
is powered by the
24VDC connector
2 inputs for
inductive probes.
Be careful to use a
compatible probe
depending on your
product reference.
RS232
connector for
connection to a
PC or PLC
Multi-function
footswitch
connector
Mini-USB
connector for
power supply
and
measurement
transfer to a PC
24 VDC power supply. If you choose
this connector to power the display, the
ON-OFF switch will be deactivated.
This power supply is not available on
the Mahr and Marposs devices
USB connector for
USB stick or QR
Code readers
Summary of Contents for M3
Page 31: ...M3 Page 31 Grey color because of the class parameters ...
Page 41: ...M3 Page 41 MB 8I Module Inductif MB 4D Module Port Mitutoyo MB 1R Module Port RS232 ...
Page 45: ...M3 Page 45 Air gage MB AG module Must be calibrated ...
Page 46: ...M3 Page 46 7 98 8 02 Write here the 2 calibration value which will be used ...
