M3
Page 49
5.4. CONFIGURATION
After clicking on this button, the below window appears.
This window allows configuring the communication settings of your M3
Choice of the transfer
mode: RS232, USB
stick or Keyboard
(refer chapter 7 and
8).
Footswitch function
- « Preset » Calibration
- « transfer » : send the measurement to the RS232 or
USB
- « part » : change the active part (part 1 / part 2)
- « Init Dyn » : start dynamic measurement (min, max…)
- « zero » : Set the displayed value at zero
- « hold » : freeze the measuring screen, the “clear”
button becomes yellow when the screen is frozen
- “screenshot” : generate a BMP file on the USB stick
when the footswitch is pressed.
When 2 functions are programed, a pressure on the
pedal makes them happen one after each other.
Language
selection. Other
languages can be
installed on
demand.
Summary of Contents for M3
Page 31: ...M3 Page 31 Grey color because of the class parameters ...
Page 41: ...M3 Page 41 MB 8I Module Inductif MB 4D Module Port Mitutoyo MB 1R Module Port RS232 ...
Page 45: ...M3 Page 45 Air gage MB AG module Must be calibrated ...
Page 46: ...M3 Page 46 7 98 8 02 Write here the 2 calibration value which will be used ...
