M3
Page 59
6.3. Temporary dynamic mode
As explained on the chapter 5.1, the characteristic is defined either as « static »
(direct) or « dynamic » (Max, Min …)
If a characteristic has been adjusted as static, it is nevertheless possible to change
temporarily to a dynamic mode, directly from the measuring screen.
To change the measuring mode, press on the icon as shown on the above picture.
Static
Max
Min
Max-Min
Average (only adapted on an automatic fixture)
Median The displayed value is calculated with the formula (MAX-MIN)/2.
When a dynamic mode has been selected, press on the
button or on the
footswitch (if configured as « init dyn » (see chap 5.4) to start recording.
Summary of Contents for M3
Page 31: ...M3 Page 31 Grey color because of the class parameters ...
Page 41: ...M3 Page 41 MB 8I Module Inductif MB 4D Module Port Mitutoyo MB 1R Module Port RS232 ...
Page 45: ...M3 Page 45 Air gage MB AG module Must be calibrated ...
Page 46: ...M3 Page 46 7 98 8 02 Write here the 2 calibration value which will be used ...
