M ET E K
M ic r o R a i n R a d a r M R R - 2
14
10.2010 Valid for MRR Service Version ≥ 5.2.0.9
4.2.7 Control- and Evaluation Computer (PC)
A personal computer (PC) with the operating system Windows® 2000 or XP
serves for setting the operation parameters and data evaluation of the MRR.
(Windows® Vista and Windows® 7 are not supported).
The PC must have at least one serial port which will be configured by the con-
trol program as follows:
57600 baud,
8 data bits, no parity,
software protocol (XON/XOFF), no hardware protocol (handshake).
Pinning (D-Sub-25-socket at the device) :
Pin 2
RD
received data
to the device
Pin 3
TD
transmitted data
from the device
Pin 7
GND
ground
The control program which is needed to operate the MRR-2 is part of delivery.
Its installation and operation is described in section 6
page 18.
