M ET E K
M ic r o R a i n R a d a r M R R - 2
44
10.2010 Valid for MRR Service Version ≥ 5.2.0.9
7.2
Control Program User Interface (CPUI)
CPUI provides the user access to the MRR-2 through CDES. The correct in-
stallation and the automatic start of the service program are required for a
successful start of CPUI. CPUI allows controlling the MRR-2 also by PCs
which are not connected directly to the MRR-2.
It is only necessary that there is a network connection to that PC, on which
CDES was started. This network connection may be either a local connection
(ethernet) or a remote access connection (RAS) which is built up using the
public telephone. (Make sure that you have purchased the required number of
program licenses.)
For this remote operation a login at the remote CDES is necessary when you
start the program (e.g. by a mouse click on a program icon you created before,
or by the command line
C:\METEK\MrrCtrl
). This ensures that only one
user is accessing the MRR-2.
There are no special network installations needed, because no network proto-
col dependent functions are used between the service and the user interface.
The following picture shows an example for a remote access, where the net-
work connection is performed by a RAS connection. The communication of the
user interface on PC #2 with the MRR-2 uses the network and the communica-
tion service program on PC #1. The data recording and the event logging is
executed on PC #1 which is connected directly to the MRR-2:
Figure 17 Remote Acces
16
Modem
10
9
18
17
8
