M ET E K
M ic r o R a i n R a d a r M R R - 2
22
10.2010 Valid for MRR Service Version ≥ 5.2.0.9
6.2.2 Control Commands Menu
Figure 11: Control Commands
Abort Averaging
The current averaging interval is stopped. Data, collected since the begin of
the averaging interval, are processed and a new averaging interval is started
regardless of elapsed averaging time.
Adjust interval length to real time clock
This checkbox activates the synchronization of measuring intervals to the ac-
tual time of day. This means every output of averaged data will occur at
„round‟ times. Example:
If the measuring time has been set to 600 seconds, output will be generated at
every full 10 min.
Reset
Pressing this button will perform a reset of
the RCPD firmware. There is no influence
on the MRR-2 parameters. It has the
same effect as an interruption of the pow-
er supply.
6.2.3 Output Parameters Menu
Figure 12: Output Parameters
