M ET E K
M ic r o R a i n R a d a r M R R - 2
18
10.2010 Valid for MRR Service Version ≥ 5.2.0.9
6
Control Program
If the PC for controlling the MRR-2 with was not ordered separately the
programs for controlling the MRR-2 and for data recording are delivered on a
CD-ROM and must be installed on a PC with operating system
Windows® 2000
or
Windows® XP.
(
Older
Windows® versions,
Windows® Vista, or Windows® 7 are not supported.)
If the PC was configured and delivered by METEK (optional) 6.1
may be skipped.
6.1
Installation
For installing the Control Program:
Insert the CD-ROM.
Login as administrator.
Open the program group
my computer
(icon on the desktop).
Open the folder for the CD-ROM device.
Change to the folder
METEK\MrrCtrl.
With the right mouse key click on the file
Mrr
XXXXXX
.inf
.
Activate the install menu. The files are copied and the registry of the PC
is updated.
When the copy process has finished, reboot the PC.
Note: The data flow rate from the MRR to the PC requires that the PC re-
sponse time does not exceed certain limits. If the PC was configured and de-
livered by METEK (optional), meeting of this request is warranted. Any modern
PC with medium performance is basically sufficient to run the Control Program
without flaws, if there are not too many other tasks running simultaneously.
Particularly virus scanning programs may slow down the PC below the mini-
mum possible value. In that case the data records are corrupted. Check the
integrity of recorded data by visual inspection or by some automated proce-
dure.
6.2
Using the Control Program
After login to the operating system open a command line window and enter the
command
MrrCtrl.exe.
The following dialogue window appears (The
screenshots in this manual were taken from a Windows® 2000 system.):
