EN |
Care and maintenance
28
2
Loosen the screws (3 pieces) on the cover
3
Remove the cover
4
Loosen the hand nut on the magnetic valve
5
Pull out the magnetic valve
6
Remove the connection cable from the connector strip
7
Insert new magnetic valve and connect connection cable to connector strip
8
Fasten magnetic valve with hand nut
9
Put on cover and fasten with screws (3 pieces)
10
Carefully push module 2 back into the holder and close the locking bracket
11
Carry out a normal operation test - see 7.2.3. Normal operation test
7.2.9. Replacement of inlet main body
1
Loosen the screws (3 pieces) on the filter housing (module 1)
2
Pull out the inlet main body
3
Remove the transparent hose and dispose of the inlet body properly
4
Connect transparent hose to new inlet body
5
Install the inlet body for the pre-filter
6
Fix the inlet base body to the filter housing (module 1) with screws (3 pcs.)
