EN |
Preparation for use
14
2
Check the coarse sieve in the spittoon
3
Install the pre-filter (if not present in the hose storage)
MULTI SYSTEM TYP 1 Built-in version
4
Fit a contact protection plate behind module 1 (if the subsurface is electrically conductive)
5
Connect the spittoon drain hose
6
Connect the drain hose
7
Connect the suction line from the hose storage (suction hose) and to the suction machine (suction
hose)
MULTI SYSTEM TYP 1 with cover
8
Placement of the MULTI SYSTEM TYP 1 with cover:
Spittoon drain above I (red), amalgam separator drain below O (yellow), min. 700 mm free height
(green) for hose storage
I
O
Free height
9
Connect the spittoon drain hose
10
Connect the suction line from the hose storage (suction hose)
