Metal-Fach ecoMAX 860P, User'S Manual And Installation

Page: 32 / 48

32
To update the software:
 disconnect power supply of the regulator.
 insert microSDHC memory card (other
types of memory cards are not supported)
to a socket in the movable casing of the
panel shown above. On the memory card
there should be written new software in
the *.pfc format as a 2 files: a file with
the panel software and a file with the
module A software.
 Software files should be placed directly on
the memory card, do not place them in
any subdirectory,
 then connect power supply of the
regulator and go to:
General settings
→
Software update and
perform the update firstly in the A module,
then in the panel, and in the end in other
devices.