Setup and Functioning
Rear Side of the Housing
8LE-D23_BA_E.docm
05.02.2019
25
/
88
Disconnecting Voltage Supply
DANGER!
Severe injuries or death may be caused by electric shock from electric
voltage
Work on components that have NOT been disconnected and are under dangerous
electric voltage will cause severe injuries (e.g. burns, paralysis, cardiac arrest),
including death.
Have work carried out only by qualified staff.
Use only the hot appliances power cord supplied by MESSRING with the
M=LIGHT LED.
Observe the safety rules for switch-off and securing before working at
current lines and devices.
DANGER!
Severe injuries or death may be caused by electric shock from
electric charge inside the housing.
Immediately after disconnection, the contacts of the mains plug may still
carry voltage for a short period.
Do NOT touch the contacts of the mains plug directly after switch-off.
CAUTION!
Burns at hot surfaces
Risk of burning on the housing of the M=LIGHT LED at temperatures of up
to 100 °C.
Allow M=LIGHT LED to cool down first before touching it.
Risk of burning on the shaft of the M=LIGHT LED suspension after
prolonged operating time.
Do NOT touch the shaft of the support bracket during operation or
shortly after switching off of the M=LIGHT LED.
Switch off M=LIGHT LED.
Allow M=LIGHT LED to cool down.
Disconnect the hot devices power supply cord from the M=LIGHT LED.
The M=LIGHT LED is disconnected from the power supply.
