M=LIGHT Control
Adjust and operate the M=LIGHT LED
8LE-D23_BA_E.docm
05.02.2019
61
/
88
Calculate maximum exposure time
Pos.: Description
1
Set frame rate
2
Adjust the power
3
Close window
4
maximum exposure time
Figure 52:
FormFlashCalculator
Press
Flash Calculator.
The
FormFlashCalculator
window opens.
Enter frame rate.
Enter level of performance.
The maximum exposure time for the set values is displayed automatically.
Identification and correction of invalid parameters
If an invalid value is set for a configuration, the corresponding setting is marked in red.
The graphic illustrations for
Sync
and
LED Light
are NOT displayed.
The settings must meet the following conditions:
I
Pulse delay [µs]
must be smaller than
Puls periode[µs]
.
I
Puls periode [µs]
must be smaller than period of SYNC signal.
I
Pulse width [µs]
must be between 20 µs and 500 µs.
I
The ratio of
Pulse width [µs]
to
Puls periode [µs]
must match the set intensity
Power [%]
page 59).
