![background image](http://html.mh-extra.com/html/meru-networks/ap433e/ap433e_installation-manual_1775117031.webp)
Figure 20, AP433i & 433is wall mounting bracket
•
Place the mounting bracket against the wall with the sliding lock
mechanism facing upwards. The Quick Reference Installation instructions
on the bracket should be visible.
•
Using the holes on the mounting bracket itself as a guide, mark the
location on the wall for the AP bracket mounting screws. If possible,
center the mounting screws on a wall stud. (If mounting on a wall stud is
impossible, use plastic wall anchors on the remaining screws.)
•
Drill holes at the locations you marked:
o
3/16-inch holes if you are using plastic anchors
o
1/8-inch holes if you are using only the screws
•
If you are using plastic anchors, install them in the holes.
•
Line the bracket up with the holes and screw in the screws.
•
Attach the mounting screws to the underside of the AP433i in the holes
provided (indicated in Figure 21, AP433i & 433is mounting screw holes)
Figure 21, AP433i & 433is mounting screw holes
•
Orient the AP433i horizontally so that you can read the Meru logo and
the Console and network ports are pointed downwards - this orientation
provides optimum MIMO performance.
•
Align the mounting screws on the back of the AP433i with the
corresponding holes on the mounting