Figure 35, Antenna-Radio Mapping & Radio Setting
Follow these steps to connect antennas:
•
Remove the protective dust caps from the antenna connectors.
•
Mount the external antenna on the same supporting structure as you did
the OAP433e, within 3 m (10 ft.) of it, using the bracket supplied in the
antenna package.
•
Connect the antenna to the OAP433e’s N-type connector (5G-1 and
2.4G-1) using the RF coaxial cable provided in the antenna box.
•
Apply weatherproofing tape to the antenna connectors to help prevent
water entering the connectors.
Follow these steps to attach the ground wire:
•
A grounding screw and cable are both provided in the product packaging.
The OAP433e has two grounding holes, in the corners on the underside
of the AP. See Figure 36, Grounding holes
•
Connect the screw to either of the holes and attach the provided
grounding wire.
•
Attach the other end of the grounding wire to an appropriate grounding
source.
Figure 36, Grounding holes