![background image](http://html.mh-extra.com/html/meru-networks/ap433e/ap433e_installation-manual_1775117032.webp)
•
bracket.
•
Slide the AP433i downwards until the screws click into the holes. They
should seat fairly firmly.
•
Slide the mounting bracket’s locking bar to the right, locking the AP in
place.
•
If desired, use the provided clip to lock the bracket shut by sliding it
through the aligned holes on the right-hand side of the bracket.See
Figure 22, Locking the AP433i & 433is in Place
Figure 22, Locking the AP433i & 433is in Place
•
Connect one end of the Ethernet cable to the switch and the other end to
the AP433i
Figure 23, Ports for AP433i & 433is
Caution!
Be sure to connect the Ethernet cable to the Ethernet port; the cable can
mistakenly be plugged into the Console port. If you do this, the AP won’t
power up