![background image](http://html.mh-extra.com/html/meru-networks/ap433e/ap433e_installation-manual_1775117058.webp)
8.6
Frequencies Blocked for Regulatory Compliance
AP433e, AP433i, & AP433is are for indoor use only , in U-NII-1 and/or U-NII-3
band when Dynamic Frequency Selection, DFS, from 5.25-5.35 GHz and 5.47-
5.725 GHz, is disabled in some regions. With DFS approval from System Director
V 6.0 SR2, AP433e, AP433i, & AP433is can be operate in U-NII-2 or U-NII-2e in
some regions
OAP433e is for outdoor use only , in U-NII-1 and/or U-NII-3 band when Dynamic
Frequency Selection, DFS, from 5.25-5.35 GHz (U-NII-2) and 5.47-5.725 GHz
(UNII-2e), is disabled for some regions. With DFS approval from System Director
V6.0 SR2, OAP433e can be operated in U-NII-2 or U-NII-2e in some regions
To ensure compliance with local regulations, be sure to set your Access Point to
the country in which you are using the Access Point.
8.7
Restriction of Hazardous Substances
8.7.1
European Community
This device complies the Restriction of Hazardous Substances Directive (RoHS)
for its restriction of the use of certain hazardous substances in electrical and
electronic equipment for European Union.
8.7.2
China
This device complies Administrative Measure on the Control of Pollution Caused
by Electronic Information Products or China RoHS. 433 SERIES APe may contain
hazardous substances are marked with the EIP logo including an Environment
Friendly Use Period (EFUP) value in 10 years as Figure 43, China toxic &
hazardous substances label
Figure 43, China toxic & hazardous substances label
8.8
Underwriters Laboratories
Use only listed e information technology equipment (ITE) I.T.E. equipment.
The unit is intended for installation in Environment A as defined in IEEE 802.3.af &
802.3at.All interconnected equipments must be contained within the same building,
including the interconnected equipment's associated LAN connection.
Suitable for use in environmental air space in accordance with Section 300-22(c)
of the National Electrical Code, and Sections 2-128, 12-010(3) and 12-100 of the
Canadian Electri cal Code, Part 1, C22.1.