Configuring the digital surround controller using a computer
99
Once you have edited the settings to suit the configuration of
your system, the next step is to store the settings to the 561 and
use the calibration listening tests built into the 561 to calibrate it
for correct performance.
To save the settings
First save the settings to your PC hard disk.
●
Choose
Save
from the
File
menu, or click the
Save button in the toolbar:
To print a summary of settings
At this stage it is useful to print a summary of the speaker and
source settings, so that you can check that they correspond to
your system configuration.
●
Check that there is a printer connected to your PC.
●
Click the
Settings
icon in the left-hand panel of the
Meridian
window.
●
Click the
Print sources and output summary
button.
To store the settings to the digital
surround controller
●
Switch on the 561 Digital Surround Controller, and check that
the serial cable is connected between the 561 and the PC.
●
Click the
Store
button in the toolbar.
The 561 will display:
Receiving...
The following
Progress
dialogue box shows how the operation
is progressing.
If there is a problem click the
Details>>
button to see more
information about the problem.
Calibrating the settings with your system
