Configuring the digital surround controller without a computer
67
To select a Type
●
Select a video source to produce an on-screen display.
●
Put the digital surround controller into standby by pressing
Off
(front panel or remote).
●
Hold down the
A
key on the front
panel until the display shows:
Type in... 5
●
Keep holding down the
A
key for a
further 5 seconds.
The display will show:
Type- Wait..
Followed by the current Type setting;
for example:
Type 5.1 AAA
●
Press
▲
or
▼
on the front panel to select the Type.
For example, if you have two analogue
speakers the display shows:
Type 2.0 A--
●
Wait for a few seconds, while the
display shows:
Typing, wait
●
Press the
Off
key on the front panel.
The display shows:
Exiting Type
