Configuring the digital surround controller using a computer
87
As you change the options the layout illustration will change to
show the resulting layout.
If you select a combination of options that is not supported, the
other options will be adjusted accordingly to ensure that the
whole configuration is valid.
For example, if you specify two sides and two rears, and then
select two subwoofers, the side speakers will be removed to
enable you to have the subwoofers.
To specify the size and type of the
main speakers
●
Choose
Large
if your main left and right speakers are large,
with good bass performance, and you want to use them for
full range reproduction.
●
Choose
Small
if your main left and right speakers do not have
a good bass response and you want to use one or more
subwoofers to handle the bass for the system.
●
Choose
analogue
or
DSP
according to the type of each
speaker.
The following table gives recommended settings for Meridian
loudspeakers:
Loudspeaker
Recommended setting
DSP5000, DSP5500,
Large DSP
DSP6000, or DSP6000C
DSP5000C
Small DSP
M60
Large analogue
M60C, M33, or A500
Small analogue
