92
Configuring the digital surround controller using a computer
To specify the source connections
●
Click the
Connections
tab to show the
Connections
page of
settings.
●
From the
Main input
drop-down menu specify the digital or
analogue audio input you want to use for the source.
●
From the
Video Input
drop-down menu specify the video
input you want to use for the source.
You can prevent the source from appearing in the list of sources,
or being selectable using the Meridian System Remote, by
disabling this option.
●
If you want, you can change the name displayed when the
source is selected by editing the
Name
field.
The name can consist of up to five letters, digits, or the
characters space, full-stop, and minus.
The name you specify is shown in the list of sources followed by
the Meridian System Remote key used to select the source in
brackets.
●
In the
Presets
section specify the DSP preset you want to use
for each of the five alternative audio formats: PCM, AC-3,
MPEG, DTS, or MLP.
Each drop-down menu gives the built-in and user-defined DSP
presets appropriate for that audio format.
