Merging VCube, User Manual

Page: 57 / 291

Transport and Navigation : Transport Tool Page 57
Transport > Toggle Transport Tool [ T ]
If Sony 9 Pin Remote Control is enabled in: Settings > Format & Sync : Sony 9 Pin Remote Control Remote On
is displayed. This means that the Internal Machine is controlled by the Sony 9 pin protocol serial data emanating
from another device. Please see: Remote Control on page 167
If Sony 9 Pin Machine Control is enabled in the same Tab then VCube controls the external machine while chas-
ing its TimeCode. A further Transport Control panel appears below the Internal Machine . Please see: Machine
Control on page 175
• Set In [ Num 7 ]
• Set Out [ Num 8 ]
Are linked to the Timeline Range.
• Goto In [ Num 4 ]
• Goto Out [ Num 5 ]
Are linked to the Timeline Locator controls.
• Rewind [ Num 1 ]
• First press 400%
• Second press 1000%
• Third press 2000%
• Fourth press 5000%
• |>|
• Play [ Space (Toggles Play/Stop) or Num Enter (Toggles Play / Pause)]
• Record [ Decimal ]
• Fast Forward [ Num 2 ]
• First press 400%
• Second press 1000%
• Third press 2000%
• Fourth press 5000%
• Stop [Num 0 ]
• Loc [ Num 6 ] Accesses the Goto Locator window.
• Loop [ L ] When checked VCube Plays in a Loop from the In point to the Out point
• Chase [Ctrl + F1]. This button cannot be enabled when using the Follow VT mode in regular
VCube or Slave to VT mode in VCube SE.
Transport Control Panel