Merging VCube, User Manual

Page: 203 / 291

Troubleshooting : Output Page Diagnostic Tools Page 203
User Interface with ATI Graphic Card
Problem:
The VCube User Interface does not refresh correctly. Some labels are missing or appear to be disabled.
Solution:
In Windows Advanced Display Properties, be sure that the ATI Troubleshoot Control Panel is set as on the screen
shot below:
NTSC Video Output Exhibits Some Dropped Frames with PAL Media Files
Problem:
A PAL Composition or a PAL Media File is loaded using the Easy Load function into the Timeline. NTSC video out-
put is required. This output exhibits some dropped frames (on the display at bottom left corner of the User Inter-
face).
Solution:
If the Composition is set to 25 fps, then, the VCube video engine only produces 25 frames per second and the
video card needs 29.97. This is the source of the dropped frames.
The Composition frame rate must be set to 29.97 fps in order to feed the video card. This can be done even if 25
fps media files are used.
Display Control Panel