Mercedes-Benz V 200 4MATIC 2015, Operating Instructions Manual

Page: 155 / 360

Signalling Meaning
Flashes green Change operating duration
active
Flashes alter-
nately red and
green
Remote control in synchro-
nising mode
When the remote control battery is weak, indi-
cator lamp
:
flashes red rapidly. Replace the
remote control battery (
Y
page 155).
You can find further information on the lamp
status under "Problems with the auxiliary heat-
ing" (
Y
page 157).
Switching the remote control on and off
The remote control switches to standby mode
after 10 seconds. Indicator lamp
:
goes out.
X To switch on: press and hold the
Ü
button
until indicator lamp
:
lights up red.
If a connection between the remote control
and the receiver in the vehicle has been estab-
lished and indicator lamp
:
:
R
flashes red, the auxiliary heating is
switched off.
R
lights up green, the auxiliary heating is
switched on.
X To switch off: press and hold the
Ü
but-
ton until indicator lamp
:
goes out.
Switching auxiliary heating on and off
X
Switch on the remote control (
Y
page 152).
X
To switch on: when indicator lamp
:
flashes
red, press the
b
button.
During data transmission, indicator lamp
:
lights up red.
When indicator lamp
:
lights up green, the
auxiliary heating is switched on.
X To switch off: when indicator lamp
:
lights
up green, press the
b
button.
During data transmission, indicator lamp
:
lights up red.
When indicator lamp
:
flashes red, the aux-
iliary heating is switched off.
Changing the operating duration
X Switch on the remote control (
Y
page 152).
X
When indicator lamp
:
flashes red, press
Ü
and
b
simultaneously.
Indicator lamp
:
flashes green.
X Press the
Ü
button repeatedly until the
desired operating duration is shown.
R
20 minutes
Indicator lamp
:
flashes green twice.
R
30 minutes
Indicator lamp
:
flashes green three
times.
R
40 minutes
Indicator lamp
:
flashes green four times.
X
Press the
b
button.
During data transmission, indicator lamp
:
lights up red.
If indicator lamp
:
emits two long, green
flashes, the selected operating duration is
stored.
If no adjustment is made, indicator lamp
:
flashes six times and the remote control goes
into standby mode.
Operating the auxiliary heating using
the timer
Timer overview
Timer in the lower centre console
:
Program column
G
Sets preset position 1 – 3 for depar-
ture times
Sets weekday (Mon. – Sun.)
;
Menu bar
y
Activates/deactivates immediate
heating mode (heater booster function)
B
Sets the departure times
Ñ
Sets the day, time and the operating
duration
ß
Sets the heating level
=
Display panel for: time, heating level and
operating duration
à
Continuous operation active
Operating the auxiliary heating system
153
Climate control
Z