Mercedes-Benz V 200 4MATIC 2015, Operating Instructions Manual

Page: 317 / 360

The system includes the reversing camera next
to the handle on the tailgate, the front camera in
the radiator trim and the two cameras in the
exterior mirrors.
Make sure that you do not apply any wax to the
camera lenses when waxing the vehicle. If nec-
essary, remove the wax using water, shampoo
and a soft cloth.
X
Clean all camera lenses with clean water and
a soft cloth.
To clean the reversing camera, it must be folded
out.
X Make sure that the engine is switched off and
the key is in position 2 in the ignition lock.
X
Make sure that the Activation by R gear
function is selected in the 360° camera menu
of Audio 20 or COMAND Online (see the sep-
arate operating instructions).
and
X
Engage reverse gear or select transmission
position R.
The reversing camera flap opens.
or
X
In Audio 20 or COMAND Online, select the
Open camera cover.
function from the
360° camera
menu (see the separate oper-
ating instructions).
The display then shows the Please wait...
message for approximately 3 seconds.
The reversing camera flap opens.
The reversing camera flap closes automatically
when the key is turned to position 0 or 1 in the
ignition lock.
Cleaning the sliding door
The care instructions do not apply to electric
sliding doors.
X Remove foreign objects from the vicinity of
contact surfaces
;
and contact pins
:
of
the sliding door.
X Clean contact surfaces
;
and contact
pins
:
with a mild cleaning agent and a soft
cloth.
Do not oil or grease contact plates
;
and
contact pins
:
.
Cleaning the trailer tow hitch
H
Environmental note
Dispose of oily and greasy cloths in an envi-
ronmentally-responsible manner.
!
Do not clean the ball coupling with a high-
pressure cleaner. Do not use solvents.
! Follow the additional notes on trailer tow
hitch care (see the manufacturer's operating
instructions).
:
Locking balls
;
Guide pin
=
Ball joint
?
Guide faces
A
Cap
B
Lock
C
Handwheel
Clean the ball coupling if it is dirty or corroded.
X
Remove traces of rust, e.g. with a wire brush.
X Remove dirt with a clean, lint-free cloth or
brush.
X
After cleaning, lightly oil or grease posi-
tions
:
to
?
and the ball coupling mounting
on the vehicle.
X Treat lock
B
under cap
A
and the shaft of
handwheel
C
with acid- and resin-free oil.
X
Check that the vehicle's trailer tow hitch is
working properly.
Care
315
Maintenance and care
Z