Mercedes-Benz V 200 4MATIC 2015, Operating Instructions Manual

Page: 316 / 360

X Clean the plastic covers of the exterior light-
ing with a damp sponge and a mild cleaning
agent, e.g. Mercedes-Benz car shampoo, or
with cleaning cloths.
Cleaning the mirror turn signal
! Only use cleaning agents or cleaning cloths
that are suitable for plastic lenses. Unsuitable
cleaning agents or cleaning cloths could
scratch or damage the plastic lenses of the
mirror turn signals.
X Clean the plastic lenses of the mirror turn sig-
nals in the exterior mirror housing using a wet
sponge and mild cleaning agent, e.g.
Mercedes-Benz car shampoo or cleaning
cloths.
Cleaning the sensors
!
Do not use dry, coarse or hard cloths and do
not scrub. You will otherwise scratch or dam-
age the sensors.
If you clean the sensors with a high-pressure
cleaner or steam cleaner, observe the infor-
mation provided by the manufacturer regard-
ing the distance to be maintained between
the vehicle and the nozzle of the high-pres-
sure cleaner.
X Clean drive system sensors
:
with water, car
shampoo and a soft cloth.
Cleaning the reversing camera
! Do not use dry, coarse or hard cloths and do
not scrub. You could otherwise scratch or
damage the lens of the reversing camera.
When cleaning the vehicle with a high-pres-
sure or steam cleaner, observe a minimum
distance of 50 cm to the reversing camera. Do
not aim directly at the reversing camera. You
could otherwise damage the reversing cam-
era.
The camera lens is next to the tailgate handle.
If the camera flap is open, make sure that you do
not apply any wax to the camera lens when wax-
ing the vehicle . If necessary, remove the wax
using water, shampoo and a soft cloth.
X
Make sure that the engine is switched off and
the key is in position 2 in the ignition lock.
X Make sure that the
Activation by R gear
function is selected in the reversing camera
menu of Audio 20/COMAND Online (see sep-
arate Operating Instructions).
X Engage reverse gear or select transmission
position R.
The reversing camera flap opens.
X
Clean the camera lens with clean water and a
soft cloth.
In vehicles with COMAND Online you can also
open the reversing camera flap directly using a
menu function:
X In COMAND Online select the
Open camera
cover function from the reversing camera
menu (see separate Operating Instructions).
The display then shows the
Please wait
message for approximately three seconds.
The reversing camera flap opens.
The reversing camera flap closes automatically
when the key is turned to position 0 or 1 in the
ignition lock.
Cleaning the 360° camera
! Do not use dry, coarse or hard cloths and do
not scrub. You could otherwise scratch or
damage the lenses of the cameras.
When cleaning the vehicle with a high-pres-
sure or steam cleaner, maintain a minimum
distance of 50 cm from the cameras. Do not
aim directly at the cameras. Otherwise, you
could damage the cameras.
314
Care
Maintenance and care