Mercedes-Benz V 200 4MATIC 2015, Operating Instructions Manual

Page: 107 / 360

If the rear seat anchorages of the bench seat/
berth have again not engaged correctly:
X
Fold the bench seat/berth forwards again
with force so that the seat anchorages engage
correctly.
X
Fit the stowage compartments (
Y
page 281).
Bed extension
If you fold up the bed extension or remove it, you
enlarge the luggage compartment.
X To fold up: pull release lever
:
back and
move bed extension
;
into an upright posi-
tion.
The bed extension engages in a vertical posi-
tion.
X
To remove: fold up bed extension
;
.
X Remove both thumbscrews
=
on both the
right and the left side.
X
Remove bed extension
;
from the guide
rails.
X To fit: align bed extension
;
over the guide
rails and insert it.
X
Screw in both thumbscrews
=
on both the
right and the left side.
Setting up/folding away the berth
G
WARNING
When folding the seat backrest up or down,
you or other vehicle occupants could become
trapped. There is a risk of injury.
Make sure that the seat backrest swinging
range is not obstructed and that no one could
become trapped.
The berth can accommodate two persons.
X
To set up: fold up the short section of the bed
extension.
X Move the bench seat/berth forwards to the
fully reclined position marking on the guide
rail (
Y
page 102).
X
Remove the head restraints of the bench
seat/berth, rotate them 180° and place them
in the holders on the back of the seat back-
rest.
When moving the seat backrest, only hold onto
the loop
X
Pull backrest release handle
:
up and adjust
the seat backrest to a horizontal position.
When doing so, only hold onto the seat back-
rest by the retainer loop (
Y
page 102).
The seat cushion will lift up slightly.
X Fold down the short part of the bed extension.
X
To fold away: fold away the berth in the
reverse order to setting it up.
When doing so, move the bench seat/berth
back to the basic position (
Y
page 102) and
ensure that the seat backrest is in an upright
position.
Seats
105
Seats, steering wheel and mirrors
Z