Mercedes-Benz V 200 4MATIC 2015, Operating Instructions Manual

Page: 81 / 360

You must reset the electric sliding door if there
has been a malfunction or an interruption in the
voltage supply (
Y
page 81).
Obstacle detection with reversing
function
The sliding door is equipped with automatic
obstacle detection with reversing feature. If a
solid object blocks or restricts the sliding door
during the automatic closing process, the slid-
ing door opens again automatically. If the sliding
door is obstructed during the opening proce-
dure, it moves back a few centimetres in the
opposite direction and stops.
Automatic obstacle detection with reversing
feature is only an aid. It is not a substitute for
your attentiveness when closing the electrical
sliding door.
If an obstacle is detected, the display shows, for
example, the Left-hand electric sliding
door Obstruction detected
message and
five warning tones sound.
G
WARNING
The reversing feature does not react:
R
to soft, light and thin objects, e.g. small fin-
gers
R
over the last 8 mm of the closing movement
This means that the reversing feature cannot
prevent someone being trapped in these sit-
uations. There is a risk of injury.
When closing, make sure that no-one has any
parts of the body within the closing area.
If someone is trapped:
R
press the
5
button on the key, or
R
pull the exterior door handle, or
R
press the respective sliding door button in
the centre console, or
R
press the button on the door frame, or
R
pull the rocker switch on door handle.
Opening/closing from the outside
The sliding door is equipped with an active
retainer, which engages the door at the end stop
when opened.
If the vehicle is fitted with 2 electric sliding
doors; the
5
button on the key can only be
used to open or close one of the two sliding
doors (
Y
page 81).
X To open: pull door handle
:
in the direction
of the arrow.
or
X
Press the
5
button on the key for longer
than 0.5 seconds.
The sliding door unlocks, automatic operation
is started and the sliding door opens. In addi-
tion, you will hear two warning signals.
X
To close: pull door handle
:
in the direction
of the arrow.
or
X Press the
5
button on the key for longer
than 0.5 seconds.
The sliding door is released from its lock and
automatic operation is started. The sliding
door closes.
If you press the
5
button on the key, you
will hear two warning signals while the doors
close.
X
To interrupt automatic operation: pull door
handle
:
again.
or
X
Press the
5
button on the key again.
i In unfavourable operating conditions, e.g.
frost, ice or heavy soiling, you can press and
hold the relevant sliding door button. The
electric sliding door moves with increased
force. Observe that, in such circumstances,
the obstacle detection is less sensitive. To
Electric sliding door
79
Opening and closing
Z