Mercedes-Benz V 200 4MATIC 2015, Operating Instructions Manual

Page: 106 / 360

Example: standard rear bench seat
:
Release handle for rear seat anchorage
;
Release handle for front seat anchorages
=
Floor anchorages
i
Only carry out the release, removal and sub-
sequent refitting of the bench seat/berth at
the marked basic position (
Y
page 102).
X
To remove: if necessary, remove the bed
extension (
Y
page 105).
X
Remove the stowage compartments
(
Y
page 281).
X
Make sure that all carriages for fore-and-aft
adjustment engage audibly on both sides.
It should not be possible to move the bench
seat/berth.
X Fold release handle for rear seat anchor-
age
:
up.
X
Tilt the bench seat/berth forward by the
upper edge of the seat backrest.
X Pull release handle for front seat ancho-
rages
;
up.
X
Hold the bench seat/berth by the lower edge
of the seat cushion.
X Tilt the bench seat/berth forwards and pull it
out of floor anchorages
=
.
X
To fit: remove the stowage compartments
(
Y
page 281).
X
Hold the bench seat/berth by the lower edge
of the seat cushion.
X From above, guide the bench seat/berth in a
tilted position into front floor anchorages
=
and allow to engage.
X Fold release handle
;
down towards the
vehicle floor.
X
Fold bench seat/berth back into the upright
position.
The rear seat anchorages of the bench seat/
berth have engaged correctly if:
R
the seat anchorages engage audibly
R
indicator tabs
?
on the seat anchorages are
no longer visible and have retracted fully into
the seat anchorages
If the rear seat anchorages of the bench seat/
berth have not engaged correctly:
X
Press release handle for rear seat ancho-
rages
:
down until indicator tabs
?
have
fully retracted into the rear seat anchorages.
104
Seats
Seats, steering wheel and mirrors