Spare wheel bracket on the rear-end door
Stainless-steel spare wheel bracket
Removing a stainless-steel spare wheel
bracket
#
Remove screwdriver
1
from the vehicle tool
kit (
/
page 418).
#
Open the lock on cover ring
3
with screw‐
driver
1
.
#
Fold tab
2
down.
#
Pull cover ring
3
apart and remove it.
#
Remove cover panel
4
.
Removing the spare wheel
#
Remove wheel nuts
5
.
#
Remove the spare wheel.
Securing the wheel to the spare wheel
bracket
#
Use nuts
5
to secure the faulty wheel to the
spare wheel bracket. Specified tightening
torque: 20 Nm
#
Position cover panel
4
again. Make sure
that retainer
6
of the cover panel engages
in recess
7
.
#
Attach cover ring
3
again and close the
lock.
%
Make sure that the lock does not cover the
reversing camera. If necessary, turn cover
ring
3
slightly.
394 Breakdown assistance
Summary of Contents for G-Class 2018
